» Product » Passive Fiber Optics

passive fiber optics

Rack Mount Patch Panel 2 Unit
Rack mount patch panel is used for fiber optic cable management and to protect the cable and equipment installed in the rack/cabinet from dust, insect, weather and etc.
Rack Mount Patch Panel 1 Unit
Rack mount patch panel is used for fiber optic cable management and to protect the cable and equipment installed in the rack/cabinet from dust, insect, weather and etc.
FAT BOX TYPE SS
Fiber Access Terminals (FAT) are designed for Air Blown Fiber and for change over from fibers emerging from microducts or drop cables to all types of fiber optic distribution cables.
FAT BOX TYPE S
Fiber Access Terminals (FAT) are designed for Air Blown Fiber and for change over from fibers emerging from microducts or drop cables to all types of fiber optic distribution cables.
FAT BOX TYPE M
Fiber Access Terminals (FAT) are designed for Air Blown Fiber and for change over from fibers emerging from microducts or drop cables to all types of fiber optic distribution cables.
Fc connector
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers.
zipcord cable singlemode/duplex
the jacket is anti-corrosion, anti-water, anti-ultraviolet radiation, flame-retardant and harmless to environment etc.
Zipcord cable singlemode/simplex
Simplex cable use single 900 micron tight buffer fiber as optical communication medium. The tight buffer fiber wrapped with a layer of aramid yarn as strength member units. And the cable is completed
Micro-PLC Splitter
The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input and output terminals,
ABS Cassette-PLC Splitter
The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input and output terminals,
OTO BOX Code 001
The OTO is an optical telecommunication outlet box, designed for low bend fibers and it is used to Connect up to two optical fibers to the passive-optical interface in the living area (Fiber to The Ho
FC Fast Connector
Connector has fiber already inside, and a pre-polished ferrule for superior result and reliable termination
LC Fast Connector
Connector has fiber already inside, and a pre-polished ferrule for superior result and reliable termination
SC fast Connector
Connector has fiber already inside, and a pre-polished ferrule for superior result and reliable termination
MU Category
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers
E 2000 connector
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers.
LC connectors
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers.
ST Category
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers.
Din connectors
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers.
SC connector
An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers.
Attenuator male/female
An attenuator is an electronic device that reduces the power of a signal without appreciably distorting its waveform.
Attenuator female/female
An attenuator is an electronic device that reduces the power of a signal without appreciably distorting its waveform.
MU category
Fiber Optic Adapters / Couplers. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together.
Hybrid category
Fiber Optic Adapters / Couplers. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together.
E 2000
Fiber Optic Adapters / Couplers. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together.
Din category
Fiber Optic Adapters / Couplers. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together.
ST category
Fiber Optic Adapters / Couplers. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together.
Lc category
Fiber Optic Adapters / Couplers. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together.
SC category
Fiber Optic Adapters / Couplers. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together.
ODC 576 core(version 2)
Fiber optic distribution cabinet

Dimension: 750*550*130 mm

Capacity : 576 core
ODC 288 core/576 core (version1)
Fiber optic distribution cabinet

Dimension : 750*550*130 mm

Capacity : 576-288 core
ODF / OCDF 800 core
Fiber optic distribution frame

Dimension : 2000 *600*300 mm

Capacity : 800 core
ODF /OCDF 1600 core
Fiber optic distribution frame

Dimension : 2200*900*325 mm

Capacity : 1600 core
ODF / OCDF 1008 core
Fiber optic distribution frame

Dimension : 2200 * 300 *325 mm

Capacity : 1008 core
Power source
This product is part of EXFO's series of FTTx optical test products. It allows for the testing of passive optical networks (PONs) at the three main wavelengths (1310, 1490 and 1550 nm)
Light source
The Pocket Pal is the easiest way to identify fibers from end to end and locate polished connector endfaces.
Its red laser shines through most yellow-jacketed fibers to help you pinpoint breaks, bend
closure 3M
This fiber optic splice closure is highly chemical-resistant material allows you to use it in various applications such as buried, underground and aerial applications
SAMJIN
Samjin protects fiber optic splicing point in various installation conditions such as aerial, ducts, wall and direct buried installation .It is specially designed for FTTH network
Fast connector
Connector has fiber already inside, and a pre-polished ferrule for superior result and reliable termination
Drop Cable Out door
The φ250μm optical fibers units are positioned in center, parallel fiber reinforced plastics (FRP) or steel wires are placed at the two sides. Then the cable is completed with a black or color LSZH sh
Drop cable indoor
parallel fiber reinforced plastics (FRP) or steel wires are placed at the two sides. A steel wire as the additional strength member is also applied.
Micro duct Connectors
range of connectors are high grade connectors that offer reliable performance in all environments.
Micro duct tube closure
Water proof closures are designed for blown fiber tube cable connection application. A micro duct can be easily connected and distributed from the closure with the use of the connecting side ports.
ABC/ABF
Air-Blown Fiber/cable offers unprecedented ease of installation, flexibility, and cost savings for current and future network requirements.
Microduct
The ducts are made of cover of silicone. Thick Walled Duct is designed for direct burial by having thicker inner tube.
Fiber Optic Closure
Fiber optic splice closure is the equipment used to offer room to fuse splice optical fiber and also to provide protections for the fused fiber joint point and the fiber cables.
Wall mount patch panel

8

wall mount patch panels are designed to support fusion splicing or direct termination of the fibers. this modular provides cross- connect and interconnect capacities for splicing and terminating.
Attenuator

6

An attenuator is an electronic device that reduces the power of a signal without appreciably distorting its waveform.
Connector

4

An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers.
Tactical Patchcord

3

Tactical Cables are designed, engineered and manufactured to specification for specialized and custom applications for an extensive array of markets in military.
pigtail

2

A fiber pigtail is a specific hardware connection used for cable termination. On a fiber pigtail, one end of the wire is simply exposed fiber and the other end has a pre-installed connector on it.
patch cord

1

Custom lengths can be quickly assembled
Simplex and duplex fiber patch cords
Single mode or multi mode fiber
Address : No. 22, Sheikh Moradi Avenue, Habibollah Street , Sattarkhan street , Iran
0098 21 66511619
0098 21 66511441
0098 21 66511466

Fax 0098 21 66502310

 
 info@nbgme.net